1/100 Gundam Gusion | Painted Build

  • Base Kit: Bandai 1/100 Gundam Gusion / Gusion Rebake
  • Modifications: Internal frame is from 1/100 Gundam Barbatos modified to fit the armor.
  • Painting Notes: Base colors are Gaiacolor Lacquers, weathered with Ammo products.

1/144 Boba Fett’s Slave I | Painted Build

  • Base Kit: Bandai 1/144 Slave I
  • Painting Notes: Primary colors with Gaiacolor Lacquers, chipping with Ammo acrylics and Gaiacolor lacquers, weathered with Ammo pigments, effects, and washes.
  • Modifications: Scribing on the display base.
  • Awards: 2nd Place, Fiction Vehicles Category, 14th IPMS (Philippines) Nationals (2016)

Fumina-Ziel | 1/144 HG Super Fumina | Customized Build

My entry to Mechapinoy’s in-house contest, in which I got the top spot amongst other awesome builds. The parts are from the HG Mechanics Neue Ziel and HG Gundam Double X. The armor and backpack are painted with metallic candy orange, dark stainless silver, brass trims, and varnished in gloss. The human parts are a simple gray and white scheme accented with purple hair, top-coated with flat clear for contrast.

Tiny Gargantuan – D-Style Zoids Iron Kong – Customized Build

I have always wanted to customize a super-deformed kit wondering how much I can do with it. It turns out, there’s quite a number of things I was able to apply without going over-the-top. Much of the was work painting the details using various masking techniques as well as hand painting. To upgrade the weapon system, a few add-ons were attached to the main cannon and I was able to find a scrap missile launcher from my Gundam Ez-SR HG kit for more firepower. A few simple scribing and pla plate work, and the Tiny Gargantuan is ready to go a-pounding.

1/100 MG Wing Gundam Ver. Ka – Painted Build

This is a custom paint build using the original colors, but making it more subtle. Using light gray instead of white levels the saturation with the other colors to balance the color scheme. Everything is out of the box, including the decals.

The 1/100 MG Wing Ver. Ka is quite an old kit and it has a few minor quirks. The sticker decals are thicker compared to later Bandai releases which makes them harder to hide. Plus, they are a challenge to position as they are not precisely cut to match the surface of the kit.

1/100 MG Gundam Heavyarms (EW) – Painted Build

This build is a commish project. I got the kit fully assembled and had to clean up some nub marks and dents. Also, a few seam lines needed to be addressed. It’s not entirely an original concept or color scheme but it was a fun project.

Base Kit: 1/100 MG Gundam Heavyarms (Endless Waltz)
Modelling Notes: Custom painted, no modifications
Products Used: Gaiacolor, Mr. Surfacer, Tamiya Enamel Colors, Tamiya Thinners

Gunpla Newbie Guide: Construction Manual Icons, What Do They Mean?

If you have built at least one Gunpla, you will recognize these icons as they are all over the construction manual. Non-Japanese-speaking (or –reading for that matter) folks like me, could only try and decipher these icons. Although Bandai’s construction manuals are easy to follow—even without any reading involved—it is still useful to know what these icons stand for.

Apply Glue


Bandai’s early Gunpla kits require the use of plastic cement or glue. Although today’s kits are snap-built, you may still see this icon in a few construction manuals.

Apply Sticker

StickerNumberThis icon comes with a Japanese symbol that identifies which sticker to use. Unless you will be painting your kit, it is recommended that you apply stickers as you go on assembling your kit.

Apply Decal

DecalLetterMore complicated kits—such as MGs and PGs—come with dry transfer and/or waterslide decals. This icon indicates that you may apply these decals during the construction of a part/section.

Attach Part to Opposite Side

AttachToOppositeSideSome parts are intended to be placed on a specific side of an assembly. This icon indicates that the specified part should be attached to the opposite side of the part related to it.

Attach Identical Parts to Each Side

IdenticalPartWhen you see this icon, attach two pieces of the same part to each side of a section.

Do Not Over-Tighten Screw


Some Gunpla kits—usually PGs—require screws. This icon warns you not to over-tighten the screw as doing so can crack the plastic and damage the part.

Also Move the Other Side


RG frames oftentimes require loosening or moving a part into position. This icon tells you to also move the opposite side of a part/section.

Cut Off


Some parts may have nubs or stumps that should be removed. Remember to only cut parts that are indicated by this icon. Otherwise, stick with cutting parts from the runner gates.

Assemble First


Construction manuals provide step-by-step instructions that should be strictly followed. Complete any section that is accompanied by this icon first before you proceed to any other assembly.

Assemble Later


This icon is the opposite of the above icon. This indicates that the section should be assembled after one or a series of assemblies have been completed.

Multiple Assembly


You can usually see this icon when assembling multiple parts/sections such as arms, legs, funnels, wings, etc. The value indicates the number of parts/sections you must complete.



This icon simply tells you to rotate a part to a specific direction as well as how many degrees it should be rotated.

Mind the Orientation

PayAttentionSome parts are a bit tricky to position so you have to pay attention to its orientation when attaching.

Alternative Parts


Some kits include alternative parts. Choose the part that you prefer and attach it. This usually solves the mystery of additional parts that are left over from your kit.